# dotfiles

Windows development-box provisioning scripts.

`setup-windows.bat` takes a fresh Windows install to a working C++ / native
development environment: editors and shells, Python, the Visual Studio 2022
toolchain (including the Clang and Windows XP targeting toolsets), the Windows
Driver Kit, and a handful of analysis tools (Sysinternals, OpenCppCoverage,
BinSkim, the Windows Performance Toolkit). It also sets the box up to be driven
remotely: OpenSSH Server plus an rsync build for Windows, which is what makes a
throwaway VM reachable from a Linux host.

## Files

| File | Purpose |
| --- | --- |
| `setup-windows.bat` | Entry point. Runs the winget installs, then launches the elevated half and prints its log, then runs the non-elevated script. |
| `setup-windows-no-uac.ps1` | The non-elevated, per-user half: WinMerge and BinSkim on the user `PATH`, and the global git config (identity, plus `core.sshCommand`). Can also be run directly from an ordinary prompt. |
| `setup-windows-with-uac.ps1` | The elevated half, started via UAC by the batch file. Enables `ssh-agent`, installs the OpenSSH Client and Server capabilities and starts `sshd`, unpacks the `rsync-windows` release zip for this architecture (`rsync.exe` plus the `ssh.exe` it runs) into `C:\Tools\rsync` on the machine `PATH`, then installs Visual Studio 2022 Community with the required components, the WDK, and the Windows Performance Toolkit. Can also be run directly from an Administrator prompt. |

## Usage

1. **Edit `setup-windows-no-uac.ps1` first.** The global git identity near the
   top of the file is empty:

   ```powershell
   $GitUserName  = ''   # e.g. 'Ada Lovelace'
   $GitUserEmail = ''   # e.g. 'ada@example.com'
   ```

   Fill in your own name and email, or leave them empty to keep your identity
   per-repository - the script skips `user.name` / `user.email` rather than
   writing a placeholder, and says so. Everything else in that script is set
   either way.

2. Run it from a normal (non-elevated) prompt:

   ```bat
   setup-windows.bat
   ```

   It will raise a single UAC prompt for the elevated half. Accept it — declining
   leaves Visual Studio and the WDK uninstalled, and the script says so.

3. Restart your shell afterwards so the updated user `PATH` is picked up, and
   reboot if a step reported that a restart was required.

## Notes

- The elevated half writes a transcript to `setup-windows-uac.log` next to the
  script; the batch file prints it when the elevated window closes. The log is
  gitignored, as it contains local paths.
- **git uses a Win32-OpenSSH client.** `setup-windows-no-uac.ps1` sets
  `core.sshCommand`. Git for Windows otherwise prefers its own bundled MSYS2
  `ssh.exe`, which cannot reach the Windows `ssh-agent` service that the elevated
  half enables - Win32-OpenSSH publishes the agent on a named pipe the MSYS2
  build does not speak. Without this, keys loaded with `ssh-add` from PowerShell
  are invisible to `git`, and a push falls back to hunting for a key file and
  prompting for its passphrase. The value uses forward slashes on purpose: git
  parses `core.sshCommand` with shell quoting rules, in which a backslash is an
  escape character.
- **Which `ssh.exe` git gets.** `C:\Tools\rsync\ssh.exe` — the fast build the
  elevated half unpacks — if it is there, `%WINDIR%/System32/OpenSSH/ssh.exe`
  otherwise. It is the same client with the same `~/.ssh`, agent and
  `known_hosts`; the difference is the stdin pump, and without it anything git
  *pushes* is capped at ~17 MB/s. Candidates are tried by **running** them
  (`ssh -V`), not by `Test-Path`: the fast build needs a `libcrypto.dll` that an
  image without the OpenSSH Client capability does not have, and a client that
  will not start should be found here rather than on the next `git push`.
  This is also why `setup-windows.bat` now runs the elevated half **first** — the
  fast `ssh.exe` has to exist before the git config step can prefer it. The
  non-elevated half still runs even when the elevated one failed; it just falls
  back. Re-run `setup-windows-no-uac.ps1` on its own at any time to re-pick.
- All three scripts are idempotent — re-running skips anything already installed.
  BinSkim in particular checks NuGet for the newest stable version *before*
  downloading: the package is a self-contained .NET build well over 100 MB, and
  re-provisioning an up-to-date box should not pay for it. The installed version
  is tracked in `nupkg-version.txt` beside the tool.
- `setup-windows-no-uac.ps1` runs its steps independently: one failing warns and
  the rest still run, and it exits 1 if any did. The `.bat` reports that and
  carries on to the elevated half, which is the part worth the UAC prompt. Use
  `-Skip` to re-run a subset, e.g. `.\setup-windows-no-uac.ps1 -Skip BinSkim`.
  Run it **non-elevated**: it writes per-user state (the `HKCU` `PATH`, the
  `.gitconfig` under `%USERPROFILE%`), so an elevated run would configure the
  administrator's profile instead. It warns if you do.
- **Remote access.** OpenSSH Server is installed from the Windows on-demand
  capability (10/1809+), set to start automatically, and given an inbound TCP 22
  firewall rule on *all* profiles — a VM's host-only or bridged adapter is
  routinely classified Public, which is the usual reason a running `sshd` is
  unreachable. Windows ships no `rsync`, so a build of it
  ([nuket/rsync-windows](https://github.com/nuket/rsync-windows)) is installed to
  `C:\Tools\rsync` and added to the **machine** `PATH`. That last detail matters:
  the remote end of an `rsync` runs non-interactively, with no login shell, and
  Win32-OpenSSH builds that environment from the registry `PATH` rather than from
  a profile. Key auth needs `~/.ssh/authorized_keys` ACL'd to just you and
  `SYSTEM`; accounts in the Administrators group use
  `C:\ProgramData\ssh\administrators_authorized_keys` instead.
- **rsync brings its own `ssh.exe`.** That release ships as one zip per
  architecture — `rsync-windows-x64.zip` / `rsync-windows-x86.zip`, each holding
  `rsync.exe`, an `ssh.exe`, `COPYING.txt` and `NOTICE-ssh.txt` — and the
  elevated half picks the zip for the OS bitness, verifies it against the
  published `.sha256`, and unpacks the pair together. Together is the point:
  `rsync.exe` prefers an `ssh.exe` sitting in its own directory, and the release
  builds one because the client Windows ships reads its stdin 3 KB at a time,
  which holds a transfer *from* the box at ~17 MB/s however fast the link is.
  Nothing else about it differs — same `~/.ssh`, same `ssh-agent`, same
  `known_hosts` — and a bare `ssh` still resolves to the in-box client, which
  sits ahead of `C:\Tools\rsync` on the `PATH`. It links against the
  `libcrypto.dll` the **OpenSSH Client** capability puts in `System32` (Windows'
  own LibreSSL, which uses AES-NI) and ships no copy of its own, so the elevated
  half installs that capability first and falls back to `rsync.exe` alone,
  warning, on an image that will not offer it.
- The `rsync` download follows the `releases/latest/download/` redirect rather
  than the GitHub API: unauthenticated API calls are rate-limited to 60/hour per
  IP, which a provisioning run behind a shared NAT can genuinely exhaust. To hold
  a box on a known build, pin the tag in `$RsyncUrl`
  (`.../releases/download/<tag>/<asset>`) instead.
- Visual Studio is installed in three labelled passes (base workload, Clang/LLVM,
  XP toolset) so a failure identifies which component group is responsible.
- The scripts were extracted from a native Windows project, so the component
  selection is tuned for that: Spectre-mitigated runtimes, the v141/XP toolset,
  and driver-kit headers. Trim the component lists in the `.ps1` if you don't
  need them — each group is a plain array near the top.